Digital Camera Battery maintenance tips
For the digital camera is the key to a key, probably second in importance only lens, laptop battery and want to photograph in Convenience, a powerful battery to provide power as a follow-up is essential. But even the best battery time, if not be properly carry out maintenance and maintenance, will not be long before lost a strong momentum, so battery maintenance is very important.
Battery Maintenance
For a (section) digital camera battery, the use of the length of time, not only with the quality, power on, in fact, with the user's operation also has great relevance. Most photographers are accustomed, after each time the camera runs out of place inside the camera bags, or placed inside cabinets, batteries are not out to save individually, this approach sounds like there is no problem, but not conducive to battery protection.
Generally speaking, if more than 15 days do not use the camera, then best to remove the battery from the camera inside a separate storage,Apple PowerBook G4 Battery preservation of the environment is best dry and shady place, and do not store the battery together with metal objects.
Rechargeable Battery Testing
According to our survey, is currently in the market you can buy the majority of digital cameras use lithium batteries, it is relatively easy storage. The only caveat is that the long-term is not used, preferably at intervals of 2 months, once to activate the battery, that is, charge and discharge time, this can effectively extend battery life.
As for the Ni-MH battery 5, the most annoying is the memory effect, this effect will reduce the total capacity of the battery and the use of time, and as time goes on, less and less stored charge, the battery also will consume the more to faster. Therefore, we should try to be all used up rechargeable power, each charge must be sufficient to power the most full. apple PowerBook G3 Battery
If you go out when the temporary use of alkaline batteries, we must remember that in time out, or else a long time if not used, the battery is easy to Tangshui corrosion circuit, the camera could not escape the destiny scrapped.
For the use of alkaline batteries of the user, as already mentioned, bear in mind is that he finished in the use of digital cameras, will surely remember that removing the battery to avoid battery fluid flow phenomena causing damage to machines.
As for the use of rechargeable nickel-metal hydride batteries and lithium batteries users. The battery charge is very particular about, and bought back the battery power is low or no power in general, the first charge must be adequate. Lithium battery charging time are generally more than 8 hours, while the Ni-MH battery charging time are generally more than 16 hours. To achieve the best results, that is, the battery reached its maximum power, there are generally three or more times repeated charge-discharge can. Batteries in use three times, the best place to find the opportunity to make a further charge fully recharge, so as not there is residual power in the battery when the repeated charge, Apple M7318 Battery or will shorten battery life. Battery charging and exhausted tend to be more heat, it is best to be cooled and then loaded camera battery.
However, note that the lithium batteries because there is no memory effect, so do not discharge, otherwise it will destroy the battery structure, and loss of battery life.
In addition, in order to avoid the loss of electricity, use nickel-metal hydride battery user, remove the battery charge after the power end, do not let the battery poles in contact with conductors at the same time, for example, do not use your fingers at the same time at both ends of the battery contacts. The use of lithium batteries users should try to keep the camera battery box battery positive and negative contact points clean, if necessary, you can use a dry cloth gently wipe the swab and then into the battery.
Also need to note that, even if the user is to use lithium batteries in the long run does not use a digital camera, it can be completely discharged, remove the battery, stored in a dry, cool environment. The other should be noted that, whether it is the use of nickel-metal hydride batteries or lithium batteries of users, it is best not to have a good electrical charge the battery Apple M8403 Battery on the bag, pocket, bag or container with metal objects in order to prevent short-circuit .
1, to avoid the frequent use of flash: If you are not a professional photographer who, then, except in the invisible fingers of the night, normal daytime light intensity for the average digital camera for sufficient.
2, as far as possible to avoid unnecessary operation of the zoom: zoom the camera lens Yi Shen a shrink, very power. You can move the pace of hyperactivity, use the "manual zoom" approach to replace the "camera zoom" in order to save power.
3, Do not let the screen has been lit: If power limited circumstances, can turn off the LCD screen, with screen viewfinder to adjust the composition, for example a digital camera, LCD should be considered as the most power-hungry components, general digital camera, close the LCD screen can be used time after the original duration of the three-fold. Apple M9324 Battery
4, less shooting and video: minimize the use of multi-shot and dynamic image video capture function, because the completion of these features is to use the built-in buffer body to temporarily save the screen shot, the power consumption a lot.
5, avoid frequent opening and shutdown: Many users know that has been lit display is power, so in use to save electricity, the frequent opening and shutdown. In fact, frequent open, shut down the electricity wasted consumption than bright display even more, especially for larger diameter lenses, but also require a substantial stretch of the camera, the switch machine is power. Most digital cameras have auto-shutdown option, this setting should not be set too short, otherwise easily lead to frequent open, shut down. Of course, frequent artificial opening, shut down should also be avoided.
6, optical image stabilization Wu Chang-Kai: optical image stabilization is through driving the lens or image sensor components is offset by video and photo material relative motion between the sensor achieved. No matter what kind of optical image stabilization mode, would lead to a small power consumption, in particular, some models can be Anti-Shake mode is set to "always open" so that the power loss caused by will be more severe.Apple A1185 Battery To this end, we have a good scenarios in the light should be shut down optical image stabilization feature, you must use should also be less "always open" mode.